Designed and hand rolled here in my Scottish borders workshop from my latest

custom specification High Modulus HMG - g4 carbon.

New HMG-g4 new tougher high impact pre impregnated epoxy resin/carbon matrix with EV Technology based rod tapers offer greater strain rates and weight reduction.

Recovery rates on all models improve on past design and are

built to the edge of the envelope in performance, lightweight with increased hoop strength and power in reserve - to cope with any situation. With a Norwich HMG - g4 rod blank you can Build yourself a rod with higher specification carbon fibre than is used by the majority of the worlds

fly rod manufacturers

All my rod blanks are cut and rolled from the raw pre-preg carbon fibre sheet material and made to order.

Please take this into account when ordering and allow time for manufacture and delivery. Currently this is approximately 3-4 weeks on most blanks.

There is a model to cover most requirements, but if there is something you require that is not listed, perhaps a different action or line rating. Please ask for a quotation.

Blank prices shown are for std unsanded carbon grey tape wrap finish. You can sand them smooth yourself with care or have it done here at a small extra charge of £7.00 per section

Coloured finishes over the standard unsanded finish are available add 15% to prices for colours. Clear gloss, Brown gloss, Green gloss and Blue gloss.

A low flash finish is also an option at no extra cost on all colours above.

Example: 9ft 6inch #6/7 HM - g4 2pce blank. List £125.00 plus colour of choice = £143.75

Picture shows Green gloss over HMG-g4 unsanded rod blank.

ROD BUILDING - REEL SEATS, COMPONENTS, VARNISH, THREADS ETC

Click here

HMG - g4 Fly Rod Blank Actions

As a guide single handed HMG-g4 blanks of medium length 9ft - 9ft 6inch , are fast and progressive in action.

Longer length single handed blanks have a slightly more progressive action but, are still fast in recovery - not through action and have good reserve power in the lower third and butt. Shorter rods under 8ft for #4/5 and under lines, are designed to load easily on a short line but are not excessively soft and have reserve of power in the butt and fast recovery for longer casts.

HMG - g4Saltwater (S Model) blanks are fast and progressive with more

g4 material in the butt and bias hoop fibres construction for added fish stopping power.

*HMG - g4* Two piece Fly Rod Blanks
7’	#4/5	2pce	£110.00	Small Stream #4 is best but use the #5 in windier conditions.
7’6"	#4/5	2pce	£115.00	Small Stream #4 is best but use the #5 in windier conditions.
8’	#4/5	2pce	£120.00	Small River. Bridges the gap and useful on streams from small to medium.
9’	#3/4	2pce	£125.00	Ultra fine presentation for River dry fly/nymph or Lake
9’	#4/5	2pce	£125.00	Ultra fine presentation for River dry fly/nymph or Lake
9’	#5/6	2pce	£125.00	River dry fly, nymph and light lake.
9’	#6/7	2pce	£130.00	Powerful river dry fly, nymph and light lake.
9’6”	#6/7	2pce	£140.00	River and lake all round first choice rod, floating or intermediate slow sink lines.
9’6”	#7/8	2pce	£145.00	River or lake. Long casting rod for wf floating and faster sink lines.
9’6”	#8/9	2pce	£155.00	Powerful single handed Grilse/ Sea Trout for wf floating and faster sink lines.

*HMG - g4* Three piece Fly Rod Blanks
9’	#3/4	3pce	£145.00	Ultra light river dry fly.
9’	#5/6	3pce	£150.00	River and light Lake good carrying length.
9’	#6/7	3pce	£155.00	Powerful river dry fly or lake good carrying length.
9’6”	#6/7	3pce	£160.00	River and lake first rate top of the water/slow sink, general purpose rod.
9’6”	#7/8	3pce	£165.00	River or lake. Long casting rod for wf floating and faster sink lines.
9’6”	#8/9	3pce	£170.00	Powerful single handed Grilse/ Sea Trout for wf floating and faster sink lines.
10’	#4/5	3pce	£170.00	Light Long river or Lake dry fly/nymph & bugging fly blank.
10’	#6/7	3pce	£175.90	River and light Lake light sea trout.
10'	#7/8	3pce	£180.00	Good for WF long belly floating and faster sink lines.Good Sea Trout/ Lake rod.
10’6”	#6/7	3pce	£185.00	River, light Lake, Loch drifting and light sea trout.
10’6”	#7-8	3pce	£190.00	Good for wf floating and faster sink lines. Good Sea Trout/ Lake rod.

All these fly rod blanks are available as complete rods. I will be pleased to give you a full build price based on your specification and custom build this for you.

The pictures show a Custom Built 10ft 6inch 3pce # 6/7 HMG Rod that I recently built for a customer.

Total price inc rod bag and U.K. Carriage was only £295.00

9’S	#7	4pce	£178.00	Saltwater. New lighter more delicate flats rod. Ideal for those spooky Bonefish,
*HMG - g4* Four piece Fly Rod Blanks
9’	#4/5	4pce	£179.90	Ultra light dry fly.
9’	#5/6	4pce	£189.90	Fast dry fly River and light Lake.
9’	#6/7	4pce	£189.90	Powerful fast river dry fly or lake.
9’(S)	#8	4pce	£188.00	Saltwater Great flats rod. Bonefish, Redfish, Jacks .
9’(S)	#9	4pce	£196.00	Saltwater Bonefish, Redfish, Jacks Extra power butt section.
9’(S)	#10	4pce	£196.00	Saltwater Tarpon, Sharks, power lift butt section.
9’6”	#6/7	4pce	£199.00	River and lake first rate top of the water/slow sink, general purpose rod.
9’6”	#7/8	4pce	£199.00	Long casting light weight with power. For Wf floating and faster sink lines.
9’6”	#8/9	4pce	£209.00	Powerful single handed Grilse/ Sea Trout for DT8 floating and faster sink Wf 9 lines.

*HMG - g4* Five piece Fly Rod Blanks
9’	#5/6	5pce	£205.00	light dry fly and nymph.
9’	#6/7	5pce	£210.00	Fast dry fly River and light Lake.
9’(S)	#8	5pce	£215.00	Compact portable Saltwater blank. Great flats rod. Bonefish, Redfish, Jacks .
9’(S)	#9	5pce	£220.00	Saltwater Bonefish, Redfish, Jacks Extra power butt section.
9’6”	#6/7	5pce	£215.00	River and lake first rate top of the water/slow sink, general purpose rod.
9’6”	#7/8	5pce	£220.00	Long casting blank. Compact and light in weight with power. For Wf floating and faster sink lines.

HMG - g4 Salmon Double Handed Fly Rod Blanks

HMG - g4 Salmon double handed blanks are all-rounders and not limited to one casting style. They will overhand and underhand cast well but, with the emphasis on good spey-casting ability.

The mult-section HMG-g4 models are carefully designed to perform equally as well as my three section Salmon fly rod blanks.

The HMG - g4 15ft EP Salmon models is designed for heavy duty sunk line work or long range casting with lines from #12-14 but will also spey or undernand cast well when correctly loaded with a

heavier spey type line.

Fully built Salmon rods are available built on any HMG-g4 blank with rod components of your choice from only £325.00


12’	#8/9	3pce	£199.00	Light Salmon, Grilse a very nice summer small stream blank.
12’	#8/9	4pce	£229.00	Light Salmon or Grilse very nice summer small stream blank. 4 sectionts for ease of transport.
12’6"	#10/11	3pce	£255.90	Powerfull fast action underhand cast rod. Capable of 45 yard casts when looded with the new heavy short belly fly lines.
12’6"	#10/11	4pce	£275.90	Powerfull fast action underhand cast rod. Capable of 45 yard casts when loaded with the new heavy short belly samon fly lines.
13’6"	#9/10	3pce	£225.00	Light salmon,Grilse an ideal summer medium river blank.
13’6"	#9/10	4pce	£255.90	Light salmon,Grilse an ideal summer, medium river spey blank. Short carry and packing length.
15’	#10/11	3pce	£255.00	The benchmark Spey rod. The most popular length and line rating for this discipline.
15’	#10/11	4pce	£279.00	The benchmark Salmon rod in 4 sections for Spey or Overhead casting. Fits in the car boot comfortably. A best seller
15’EP	#12+	4pce	£295.00	Long range sunk line rod. For shooting heads and modern heavy spey taper lines.

These blanks are covered by the same unconditional breakage warranty as my ev series fly rod blanks, and include a statutory 12 month fault of manufacture warranty.

ROD BUILDING - REEL SEATS, COMPONENTS, VARNISH, THREADS ETC

Click here

ROD REPAIRS

I CAN SUPPLY REPLACEMENT SECTIONS FOR MOST CARBON FIBRE FLY AND SPIN RODS.

EITHER TO THE ORIGINAL SPECIFICATION OR SUPER-CHARGE YOUR ROD WITH A NORWICH HIGH PERFORMANCE UPGRADED TAPER AND THE LATEST AEROSPACE CARBON FIBRES.

PRICES FOR INDIVIDUAL CARBON SECTIONS FOR HOME FINISHING START AT £60.00 PLUS CARRIAGE.

CONTACT ME FOR AN EXACT QUOTATATION WITH DETAILS OF THE ROD YOU REQUIRE A SECTION FOR.

Email : davidnorwichrods@btinternet.com

OR TEL: 01578 760 310

David Norwich.

Hillside Works, Fountainhall, Nr. Galashiels, TD1 2SU, SCOTLAND

TEL: 01578 760 310